UnitCalcPro

Brick Calculator

Count the bricks for a wall from its length, height and thickness, less doors and windows, with the mortar, cement bags and sand for the joints.

Inputs

Wall

Bricks and mortar

Results

Bricks

788

750 for 15 m² of wall at 50 per m², plus 5%.

Wet mortar

0.206 m³

Wall volume 1.35 m³ less the bricks, plus 5%. 7.26 ft³, 0.27 yd³.

Cement bags (50 kg)

2

1.12 bags, 56.2 kg of cement. Dry mortar 0.273 m³ (wet × 1.33) split 1 : 6.

Sand

0.234 m³

8.27 ft³, 0.31 yd³.

How to use the brick calculator

Enter the wall's length and height in meters or feet, and the total area of any doors and windows in the same unit squared. Choose a half-brick wall, one brick wide, or a one-brick wall, two bricks wide. Then pick the brick size, the mortar joint, the mortar mix and a waste allowance.

The result is the number of bricks to buy, the wet mortar to lay them, and the cement bags and sand to make that mortar.

How the bricks and mortar are counted

Each brick takes up its own face plus one joint in each direction. A 215 × 65 mm UK brick with 10 mm joints covers 225 × 75 mm, so 1 ÷ (0.225 × 0.075) = 59.3 bricks per m² of a half-brick wall. A one-brick wall has two leaves, so it needs twice as many. The net wall area, less openings, is multiplied by that figure, as the Brick Industry Association recommends.

Mortar is the wall's volume minus the bricks' volume. Dry sand and cement shrink when mixed with water, so the wet mortar is multiplied by 1.33 to get the dry materials, then split in the mix ratio. Cement is converted at 1,440 kg/m³.

Brick sizes: India's modular brick is 190 × 90 × 90 mm and the non-modular one 230 × 110 × 70 mm, both from IS 1077. The UK brick is 215 × 102.5 × 65 mm, and the US modular brick 7⅝ × 3⅝ × 2¼ in.

Worked examples

A 5 m × 3 m half-brick wall in Indian modular bricks has 15 m² of face. At 50 bricks per m² that is 750 bricks, or 788 with 5% extra. The mortar comes to 0.206 m³, which in a 1 : 6 mix needs 1.12 bags of 50 kg cement, so 2 bags, and 0.234 m³ of sand.

A 10 m × 2.4 m one-brick wall in UK bricks, with 2 m² of windows, has 22 m² of face at 118.5 bricks per m²: 2,607.4 bricks, or 2,738 with 5% extra. In 1 : 4 mortar it needs 1.045 m³ of wet mortar, 16.01 bags of 25 kg cement, so 17, and 1.112 m³ of sand.

Before you order

Bricks vary between batches and suppliers. A few points to check:

  • Measure a few bricks from your supplier. Hand-made bricks are often a few millimeters off their nominal size.
  • Use 5% extra for machine-made bricks and 10% for hand-made ones or a lot of cutting.
  • Stronger 1 : 4 mortar suits work below the damp-proof course and exposed walls. 1 : 6 is common for general walls. Follow your local code or engineer where they differ.
  • Order all the bricks for a wall from one batch, so the colour matches.

Sources

Frequently Asked Questions

How many bricks are in 1 m² of wall?
With 10 mm joints, about 59 UK bricks or 50 Indian modular bricks per m² of half-brick wall. A one-brick wall needs twice as many: about 119 or 100.
How many bricks are in 1 m³ of brickwork?
About 500 Indian modular bricks. With joints, each brick fills 200 × 100 × 100 mm, which is 0.002 m³.
How much cement is needed for brickwork?
It depends on the mix and the brick size. A 15 m² half-brick wall in modular bricks needs about 56 kg of cement in 1 : 6 mortar. Larger, flatter bricks need more mortar per square meter.
Should I subtract doors and windows?
Yes. Enter their total area, and the calculator takes it off the wall before counting bricks and mortar.
Add this calculator to your website

Free for any website, blog or class page. Paste this HTML where you want the tool to appear.